File system Upload and download files
IX14 User Guide
764
Download files
1. Log into the IX14 WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click to open the directory.
4. Highlight the appropriate file and click (download).
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the IX14 device
To copy a file from a remote host to the IX14 device, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to the
IX14 device.
n
local-path is the location on the IX14 device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the IX14 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX14-22.2.9.85.bin
local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
IX14-22.2.9.85.bin 100% 36MB 11.1MB/s 00:03
>
To Next Page
Loading...
Need help?
General
