Digi IX14 User Manual

Applications Digidevice module
IX14 User Guide
469
timestamp:float=None, units:str=None,
geo_location:Tuple[float, float, float]=None, quality:int=None,
data_type:digidevice.datapoint.DataType=None, timeout:float=None)
...
5. Use the help command with datapoint.upload_multiple:
>>> help(datapoint.upload_multiple)
Help on function upload_multiple in module digidevice.datapoint:
upload_multiple(datapoints:List[digidevice.datapoint.DataPoint],
timeout:float=None)
...
6. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Use digidevice.config for device configuration
Use the config Python module to access and modify the device configuration.
Read the device configuration
1. Log into the IX14 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May 9 2021, 22:49:59)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the config submodule:
>>> from digidevice import config
>>>
4. Use config.load() and the get() method to return the device's configuration:
a. Return the entire configuration:
>>> from pprint import pprint # use pprint vs. print to make the
output easier to read
>>> cfg = config.load()
>>> pprint(cfg.dump().splitlines())
This returns the device configuration:
...
network.interface.lan1.device=/network/bridge/lan1

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English