Initial configuration Configure SIM PIN
IX14 User Guide
54
Configure SIM PIN
If your cellular provider requires a SIM pin, configure the PIN for a SIM:
WebUI
1. Click Configuration > Modem.
2. Enter the PIN in the PIN field.
3. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, set the SIM PIN:
(config)> modem modem pin pin
(config)>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure system settings
To configure system settings:
WebUI
To Next Page
Loading...
Need help?
General
