Monitoring intelliFlow
IX14 User Guide
516
intelliFlow
intelliFlow monitors system information, network data usage, and traffic information, and displays
the information in a series of charts available in the local WebUI. To use intelliFlow, the IX14 must be
powered on and you must have access to the local WebUI. Once you enable intelliFlow, the Status >
intelliFlow option is available in the main menu. By default, intelliFlow is disabled.
intelliFlow provides charts on the following information:
n
System utilisation
n
Top data usage by host
n
Top data usage by server
n
Top data usage by service
n
Host data usage over time
intelliFlow charts are dymanic; at any point, you can click inside the chart to drill down to view more
granular information, and menu options allow you to change various aspects of the information being
displayed.
Note When intelliFlow is enabled and the device is connected to Digi aView, it adds an estimated
50MB of data usage for the device by reporting the metrics to aView. intelliflow does not currently
work with Digi Remote Manager.
Enable intelliFlow
Required configuration items
n
Enable intelliFlow.
Additional configuration items
n
The firewall zone for internal clients being monitored by intelliFlow.
To enable intelliFlow:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General
