Serial port
IX14 User Guide
172
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Log serial port messages
To display and configure the serial port log:
WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections, click Serial.
4. Click Log.
The Serial port log window displays.
5. Click Start to start serial port logging.
6. Click Stop to stop serial port logging if it has been started.
7. Click Refresh to refresh the log display.
8. Click Download to download the serial port log.
9. (Optional) For Log size, configure the maximum allowed log size for the serial port log. The
default is 65536.
To Next Page
Loading...
Need help?
General
