Digi IX14 User Manual

Digi IX14 Quick start Step 3: Connect hardware
IX14 User Guide
21
Ethernet cable
Use an Ethernet cable to connect the IX14 WAN/ETH1 port to a laptop or PC to
access the local web interface via a browser or connect to a WAN.
Phillips-head screwdriver
Use a #1 Phillips-head screwdriver to remove and replace the SIM door when
installing SIM cards.
Power supply
Use a power supply provided by a Digi accessory kit or use an alternate power
supply that complies with the power supply requirements.
SIM card(s)
Acquire SIM cards as needed. Note the carrier, network APN (Access Point
Name), and SIM pin (if any) for each card.
Laptop or personal computer
Use an Ethernet cable to connect the IX14 WAN/ETH1 port to a laptop or PC to
access the local web interface via a browser.
Step 3: Connect hardware
a. Install SIM card(s). See Install SIM cards.
b. Attach antenna(s). See Attach and position antennas.

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English