Digi IX14 User Manual

Applications Digidevice module
IX14 User Guide
465
Use digidevice.cli to execute CLI commands
Use the digidevice.cli Python module to issue CLI commands from Python to retrieve status and
statistical information about the device.
For example, to display the system status and statistics by using an interactive Python session, use
the show system command with the cli module:
1. Log into the IX14 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May 9 2021, 22:49:59)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the cli submodule:
>>> from digidevice import cli
>>>
4. Execute a CLI command using the cli.execute(command) function. For example, to print the
system status and statistics to stdout using the show system command:
>>> response = cli.execute("show system")
>>>
>>> print (response)
Model : Digi IX14
Serial Number : IX14-000065
SKU : IX14
Hostname : IX14
MAC Address : DF:DD:E2:AE:21:18
Hardware Version : 50001947-01 1P
Firmware Version : 22.2.9.85
Alt. Firmware Version : 22.2.9.85
Alt. Firmware Build Date : Thurs, 03 March 2022 10:16:23
Bootloader Version : 19.7.23.0-15f936e0ed
Current Time : Thurs, 03 March 2022 10:16:23 +0000
CPU : 1.4%
Uptime : 6 days, 6 hours, 21 minutes, 57 seconds
(541317s)
Temperature : 40C
>>>
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English