Digi IX14 User Manual

User authentication Authentication groups
IX14 User Guide
183
Add an authentication group 185
Delete an authentication group 189
Change the access rights for a predefined group
By default, two authentication groups are predefined: admin and serial. To change the access rights
of the predefined groups:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Groups.
4. Click the authentication group to be changed, either admin or serial, to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
l
Full access provides users of this group with the ability to manage the IX14 device
by using the WebUI or the Admin CLI.
l
Read-only access provides users of this group with read-only access to the WebUI
and Admin CLI.
The default is Full access.
n
Interactive shell access

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English