To Next Page

To Previous Page

Page 7-8 Infinity Gamma Series VF4

Continuous Recordings

Continuous recordings provide an up-to-the-second printout of

patient data. This mode is useful when more than 20 seconds of

data must be printed during critical, short-term applications.

NOTES:

! You can request a continuous recording during an alarm, timed,

trend, and diagnostic log recording. To do so, first stop the

recording in progress with the Record fixed key on the moni-

tor, then press and hold the same key to start the continuous

recording.

! Continuous OCRG recordings are not supported.

STEPS: Starting a Continuous Recording

1. Press the Record fixed key for at least two seconds. Two

beeps indicate when the recording starts.

2. To cancel the recording, press the

Record fixed key again or

the

Stop key of the recorder while printing is in progress.

Continuous recordings cannot be stored. If you attempt to store a

continuous recording, the monitor will store it as a timed record-

ing with 20 seconds of patient data.

NOTES:

! If the user requests a continuous recording at the central sta-

tion while a timed recording is in progress, the timed recording

is cancelled. A continuous recording can only be printed out if

two recorders are available. If only one recorder is available,

the continuous recording request is converted to a timed

recording, then stored and printed when the recorder becomes

available.

! An uninterrupted continuous recording on a laser printer con-

sists of up to 120 pages.

Dräger Infinity Series User Manual

Other manuals for Dräger Infinity Series