Dräger Infinity Series User Manual

Page 2-18 Infinity Gamma Series VF4
Setting the Master Speaker Volume
The setting for the master speaker volume defines the volume for
alarm tones, pulse tones, attention and error tones. The available
settings are
Low, Medium, High, and OFF.
NOTES:
! For safety reasons, you cannot turn the speaker volume off
when the monitor operates as a stand-alone device or if the
French-NFC mode has been selected (a Service setting).
! If your monitor is operating in the Infinity network and you
turn the speaker volume off, a crossed speaker symbol appears
above the first waveform channel.
STEPS:Setting the Speaker Volume
1. Press the Menu fixed key.
2. Click on
Monitor Setup.
3. Click on
Monitor Options.
4. Click on
Speaker Volume.
5. Click the knob, select a setting, and click the knob again.
NOTE: The setting for the master speaker volume defines the
maximum volume for all tones, including the user-adjustable QRS
and SpO
2
pulse tones. Therefore, if you set the master speaker vol-
ume to Low, but set the QRS and SpO
2
pulse tones to High in the
EKG or SpO
2
menu (see EKG and SpO
2
chapters), the master vol-
ume setting prevails and pulse tones sound at a low volume.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English