Dräger Infinity Series User Manual

Page C-12 Infinity Gamma Series VF4
Biomedical Support
This section of the appendix is designed for the Biomedical per-
sonnel of your hospital. It includes an overview of the Biomed
menu, basic setup, saving setups, diagnostic functions, and cali-
bration check procedures for NBP. This appendix is not a substi-
tute for the Infinity Gamma Series Service Manual that is
available from Dräger.
CAUTION: Verify that the monitor’s line frequency under the
“Service” menu is set to match the 50 or 60 Hz mains power line
frequency of your hospital. The line frequency determines the cen-
ter frequency of the ECG notch filter. The filter greatly reduces line
frequency noise on the ECG waveform. Refer to the Service manual
for details how to change frequency.

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)