Dräger Infinity Series User Manual

End-Tidal CO2
VF4 Infinity Gamma Series Page 13-15
Measuring Mode
Configure the etCO
2
pod for mainstream or sidestream monitor-
ing as follows.
STEPS: Selecting the Measuring Mode
1. Click on the etCO
2
parameter box.
2. Click on
More...
3. Click on Meas. Mode.
4. Select the desired measurement mode (
Main or Side) and
click the knob.
Anesthetic Agent Compensation
The monitor allows the user to adjust the etCO
2
detection to com-
pensate for expired and inspired anesthetic agents in the patient’s
air supply. Failure to compensate for anesthetic agents results in
inaccurate measurement values. Available compensation settings
are:
! 0% to 20%, in increments of 1% (default 0%).
NOTE: If you set the Expired field, the Inspired field automati-
cally adjusts to an appropriate value. However, if you set the
Inspired field, the Expired field does not change.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English