Dräger Infinity Series User Manual

Page C-16 Infinity Gamma Series VF4
Saving a Patient Setup
You can save and re-use the current monitoring configuration.
This saved configuration is automatically restored when a new
patient of the same category (e.g., pediatric) is admitted.
The monitor saves the following settings: Waveform channel
assignments and scales, alarm limits and on/off status, IBP pres-
sure labels, arrhythmia monitoring settings (adult or pediatric
mode only), respiration mode and markers, apnea time, coinci-
dence alarm, etCO
2
measurement mode, and pacemaker setting
and detection.
STEPS: Saving a Patient’s Setup
1. Press the Menu fixed key.
2. Click on
Monitor Setup.
3. Click on
Biomed.
4. Dial in the Biomed password and click the knob.
5. Click on
Save Setups.
6. Click on
Save Setup, select Confirm (or Cancel) and click
the knob.
The monitor saves the current monitoring setup for future use.
The setup is available even after the current patient has been dis-
charged from this monitor.
NOTE: You cannot save a setup when an OCRG is displayed on
the screen. Exit the OCRG display before saving.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English