Dräger Infinity Series User Manual

Admission/Discharge/Transfer
VF4 Infinity Gamma Series Page 4-5
Patient Category
NOTE: The currently selected patient category is indicated
between the first and second waveform channels next to the param-
eter boxes.
STEPS: Selecting the Patient Category
1. Call up the Patient Admit menu (Menu > Admit/Discharge >
Patient Admit, see above).
2. Click on
Patient Category.
3. Dial in the desired patient category (Adult, Pediatric, Neo-
nate) and click the knob.
When you change the patient category, the monitor:
! Clears all current alarms, including their messages.
! Stops any NBP measurement in progress.
! Deletes stored trend data, events, and recordings.
! Returns alarm limits to their category-specific default settings
(see appendix Default Settings and Biomedical Support).
! Returns waveform display scales (sizes) to their category-
specific default settings (see appendix Default Settings and
Biomedical Support).
! Sets the display range for trend values according to the
selected patient category (see Trends chapter).

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English