Page 3-2 Infinity Gamma Series VF4
Overview
The Infinity network provides communication links between the
bedside monitor and other network devices such as a central sta-
tion, other monitors, recorders, and laser printers. The network
allows you to monitor your patient at a central location away
from the bedside, and to monitor many patients at once. In detail,
within the Infinity network you can:
! View patient data of up to 16 patients at a dedicated central
station (M
ULTIVIEW WORKSTATION™).
! Admit patients at the central station.
! Receive bedside alarm messages at the central station and at
other devices within the network.
! Receive alarm messages from other devices within the net-
work at the local bedside monitor.
! Control alarms from the central station.
! Initiate a Relearn of a patient’s ECG and respiration pattern
from the central station.
! Set arrhythmia parameters from the central station.
! Print recordings on network recorders and laser printers.
! Transfer patients between monitors in the network.
! Collect diagnostic logs at the central station.
! View monitoring data on a larger video display.
If the monitor becomes disconnected from the network, it oper-
ates in standalone mode and the M
ULTIVIEW WORKSTATION dis-
plays an offline message.
NOTE: In order to limit the number of alarm messages from
remote beds within the network, you can group beds into separate
alarm groups so that only messages from monitors within the same
group are shared. For details see the chapter Alarms and Messages.
To Next Page
Loading...
Need help?
General
