Dräger Infinity Series User Manual

Page C-2 Infinity Gamma Series VF4
Default Settings
The first section of this appendix list the default settings for the
monitor. These settings are programmed into the monitor as you
receive it from the factory, and are used by the monitor until the
user changes them. The first three columns in the following table
show these settings for adult, pediatric, and neonatal monitoring
modes.
After discharging a patient to admit a new patient, most settings,
called patient settings, are remembered by the monitor while oth-
ers return to their factory defaults. If the user chooses to save the
current patient setup, many factory settings are changed to
patient settings, and will be active for the next patient of that cat-
egory. Whether or not a setting returns to its factory default
between patients or can be saved as a monitoring configuration is
noted in the following table.
NOTES:
! Alarm Limits, Alarm On/Off, and Record On/Off settings are
considered Patient Settings for all parameters except where
noted.
! Some settings are for optional features and are only available
on units with these options installed or enabled.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English