Dräger Infinity Series User Manual

Admission/Discharge/Transfer
VF4 Infinity Gamma Series Page 4-11
Transfer Across the Network
NOTE: Before data transfer can take place over the network, the
source monitor must be placed into Standby mode.
STEPS: Transfer Across the Network
At the source monitor:
1. Place the source monitor into Standby.
At the destination monitor:
1. Press the
Menu fixed key.
2. Click on
Admit/Discharge.
3. Click on
Transfer. The Transfer menu opens.
4. Click on
Care Unit. Selection *** is the default and automat-
ically selects all care units. If you want to narrow your search
for the transfer bed and select the specific care unit in which
the source monitor is located, dial in the appropriate care unit
from the available choices in the menu and click the knob.
NOTE: The menu shows only those care units which have at least
one bedside monitor in Standby mode.
5. Click on Transfer Bed.
6. Select the bed label of the source monitor and click the knob.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English