Dräger Infinity Series User Manual

End-Tidal CO2
VF4 Infinity Gamma Series Page 13-13
RRc Apnea Time
The monitor can detect apnea in all monitoring modes based on
changes in exhaled CO
2
values. Apnea times are:
! 10 to 30 seconds in increments of 5 or OFF
NOTE: In neonatal monitoring mode, the Apnea alarm is on by
default.
Upon detection of an apnea event and after the selected apnea
time has elapsed, the monitor triggers a serious alarm.
STEPS: Setting the RRc Apnea Time
1. Click on the etCO
2
parameter box.
2. Click on
More...
3. Click on RRc Apnea.
4. Select the desired apnea time and click the knob.
NOTE: Changing the value for the RRc Apnea time also changes
the Apnea Time setting for Rsp monitoring.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English