Dräger Infinity Series User Manual

Page 15-10 Infinity Gamma Series VF4
Measurement Tone
The end of an NBP measurement can be indicated by an end-of-
measurement tone (2 beeps). The loudness of the tone depends on
the setting for the monitor’s speaker volume. If the volume is
turned off, the tone does not sound.
STEPS: Turning the Measurement Tone ON/OFF
1. Click on the NBP parameter box.
2. Click on
Measurement Tone.
3. Select
ON or OFF and click the knob.

Dräger Infinity Series Specifications

General

Brand	Dräger
Model	Infinity Series
Category	Medical Equipment
Language	English