Chapter 4: Operation
4-58 Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Paediatric CRRT treatments
4.7.6.5 Connecting the patient
Tip
If the patient is not yet available, then recirculation can be continued by
pressing the [START/RESET] key.
Note
In the case of CVVH, connect the substituate line in predilution,
if necessary.
If using an NaCl solution with two
connectors:
 Disconnect the arterial patient line from
the NaCl solution and connect it to the
arterial vascular access.
or
 Connect the arterial and venous patient
line to the vascular access.
If using an NaCl solution with one
connector:
 Connect the arterial and venous patient
line to the vascular access.
and
 Use the rotary selector to select Start
connection? [OK] to confirm! and press
[OK].
The blood pump will deliver at the
programmed rate.
Settable rate:
Paediatric 10 ml/min to 50 ml/min
(default 50 ml/min)
To Next Page
Loading...
Need help?
General
