Chapter 4: Operation
4-40 Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
CRRT treatments with citrate anticoagulation
4.6.6.3 Priming the tubing system
4.6.6.4 Rinsing the tubing system / entering treatment parameters
 Use the rotary selector to select Start
priming? [OK] to confirm! and press
[OK].
Heparin can be added to the NaCl solution
used for priming and rinsing via the Bolus
menu field.
 Open the infusion / extraction point to
prime the arterial bubble catcher.
If the amount of air in the arterial bubble
catcher has decreased to a level of approx.
1 cm underneath the lid, the infusion /
extraction point has to be closed.
Warning
Please ensure that the ratios of blood flow to dialysate flow / substituate
flow are properly set.
Note
Please set the treatment parameters (citrate dose, calcium dose, blood
flow, dialysate flow) as described in chapter 7.
To Next Page
Loading...
Need help?
General
