Chapter 4: Operation
4-68 Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Membrane plasma separation (MPS)
4.8.6 Preparation
4.8.6.1 Priming the tubing system
This screen will be displayed immediately if
the setting in the System parameters menu
was set to Complete tubing arrangement.
 Confirm the completely inserted tubing
system using the rotary selector to select
Set up? [OK] to confirm! and press
[OK].
Note
The patient must not be connected during preparation. If the optical
detector senses opaque fluid during the preparation phase, the system
asks whether a patient has been connected.
 Use the rotary selector to select Start
priming? [OK] to confirm! and press
[OK].
Heparin can be added to the NaCl solution
used for priming and rinsing via the Bolus
menu field.
To Next Page
Loading...
Need help?
General
