GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-39
3-7-5 Installing the DeskJet Color Printer via Bluetooth connection
NOTE: Installation of the DeskJet Color Printer has to be performed in sequential order!
Content in this section
3-7-5-1 Installing the Bluetooth Adapter and Software
1.) Turn ON the system and wait till the system has booted.
2.) Connect the Bluetooth Adapter according to connection scheme, see
3.) Connect the USB "standard GE" service dongle to the USB connector(s) on the rear of the system.
As soon as the dongle is detected the login window pops up. Remove the dongle.
4.) Enter the "Standard GE Revolving" password (changes every six months) and then click ENABLE
.
5.) Press the ALT
+ F4 key again to close the Ultrasound Application.
6.) Press CTRL
+ ESC key simultaneously and open the Windows start menu.
7.) Using the “Arrow” keys on the keyboard, select Computer Management.
Figure 3-32 select “Computer Management”
To Next Page
Loading...
Need help?
General
