GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
5-40 Section 5-7 - Monitor
Section 5-7
Monitor
NOTE: From Voluson™ P8/Voluson™P6 system, it's accessible via not monitor adjustment but monitor menu
on application. Please refer to Section 5-8.
Section 5-8
Monitor setup
NOTE: Changing the monitor settings through the utility page, it takes 1 second to apply the adjusted value to
the monitor.
1.) Press the UTILITIES
key on the control panel.
On the left side of the screen select the MONITOR
.
Figure 5-15 Monitor settings