Honeywell HPM User Manual

3 UCN Status Displays
3.6 NIM Detail Status Displays
228 HPM High-Performance Process Manager Service R688
Honeywell December 2020
NIM Driver Configuration display status
The following table defines the information in the NIM Driver Configuration display.
Table 43 NIM Driver Configuration Display Status
Term
Description
PROTOCOL VERSION
The version of the UCN Communications protocol which
exists in the NIM UCN Communications Driver.
PROTOCOL
REVISION
The revision of the UCN Communications protocol which
exists in the NIM UCN Communications Driver.
UCN LLC VERSION
The version of the Logical Link Control layer which exists in
the UCN.
UCN LLC REVISION
The revision of the Logical Link Control layer which exists in
the UCN.
DRIVER VERSION
The version of the UCN Communications Driver in the NIM.
DRIVER REVISION
The revision of the UCN Communications Driver in the NIM.
NUMBER OF EVENT
RECEIVERS
The number of event receivers currently recognized by the
UCN Driver.
TOKEN RING
NUMBER ?
Is the NIM currently in the UCN token ring? (YES or NO)
There are four possible messages that can appear under
the TOKEN RING NUMBER ? text. They are:
CHANNEL A ABANDONED DUE TO SILENCE
CHANNEL B ABANDONED DUE TO SILENCE
CHANNEL A ABANDONED DUE TO NOISE
CHANNEL B ABANDONED DUE TO NOISE
The CHANNEL A and CHANNEL B messages are exclusive
to each other.
MODEM REV
The revision of the NIM UCN Communications Driver
TBC REV
The revision of the Token Bus Controller
UCN Driver statistics (UCN STATS target)
The NIM maintains a set of UCN Driver statistics that are used to evaluate the condition of the UCN as
seen by the NIM. These statistics are requested by selection of the UCN STATS target. The statistics are
presented in the two pages of the NIM Local UCN Statistics display as shown in Figure 118 and Figure
119.

Honeywell HPM Specifications

General

Brand	Honeywell
Model	HPM
Category	Network Hardware
Language	English