3 UCN Status Displays
3.7 HPMM Detail Status Displays
232 HPM High-Performance Process Manager Service R688
Honeywell December 2020
3.7 HPMM Detail Status Displays
HPMM Detail Status display selection
The Primary and Secondary HPMM Detail Status displays are shown in Figure 120 and Figure 121. The
primary or secondary display is obtained by choosing the HPM of interest on the UCN Status display,
selecting the DETAIL STATUS target, choosing the primary or secondary HPMM, and then selecting
the DETAIL STATUS target.
Primary HPMM Detail Status display
Figure 120 Primary HPMM Detail Status Display
To Next Page
Loading...
Need help?
General
