3 UCN Status Displays
3.8 IOP Detail Status Displays
R688 HPM High-Performance Process Manager Service 293
December 2020 Honeywell
STIM IOP Detail Status display
The unique data on the Smart Transmitter Interface IOP Detail Status display consists of a single target
as shown in the following figure.
The LINE FREQUENCY target permits selection of 50 Hz or 60 Hz operation. The selection is
identified by reverse video.
Figure 174 Smart Transmitter Interface IOP Detail Status Display
PI IOP Detail Status Display
Unique display information
Some of the information provided by an IOP Detail Status display is unique for the type of IOP.
To Next Page
Loading...
Need help?
General
