iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 6-62 Extend properties of the icon
----End
6.4.2.1.5 Creating the Water Sensor on the NetEco
This section describes how to create Water Sensor icons to bind the managed objects,
indicators, and alarms.
Prerequisites
You have logged in to the NetEco client by web browser
You have the operation rights for configuring Data Center View.
Procedure
Step 1 Choose Monitor > Topo > Data Center View from the main menu. The Data Center View
window is displayed.
Step 2 In the 3D view editing area, click on the toolbar. The Toolbox dialog box is displayed.
Step 3 Drag to the required position in the view. The Property Panel dialog box is
displayed, as shown in Figure 6-63.
To Next Page
Loading...
Need help?
General