Huawei iManager NetEco 6000 User Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
218
Figure 6-74 Configuring parameters for a Water Leakage Sensor MODBUS-RTU
Table 6-31 MODBUS-RTU device parameter description
Parameter
Description
Name
Device name
IP address
Set the IP address of the data collector to which the device connects.
Port
Set this parameter to the port through which the device connects to
the collector.
To learn ports on the ECC collector, see Setting RS485 Parameters
for the ECC500 V6 Collector.
Device Address
Set this parameter to the address set on the device (set to 1 by
default).
Timeout period
Timeout duration for connection test (set to 3s by default)

Huawei iManager NetEco 6000 Specifications

General

Brand	Huawei
Model	iManager NetEco 6000
Category	Server
Language	English