iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
7.2.7.3 Replacing a Single-Door Magnetic Lock
The method of replacing a single-door magnetic lock is similar to that of replacing a
double-door magnetic lock. For details, see the section about replacing a double-door
magnetic lock.
7.2.7.4 Replacing a Card Reader
Prerequisites
A card reader needs to be replaced.
Spare card readers of the same model are available and functional.
Context
Prepare a spare access card reader of the same model.
Recommended tools and materials: crimping tool and Phillips screwdriver
Procedure
Step 1 Remove the post side panel.
Step 2 Remove the installation plate of the card reader, as shown in Figure 7-29.
To Next Page
Loading...
Need help?
General