Linhai Mini 80 User Manual

CHAPTER 3B ENGINE 50cc/80cc ATV SERVICE MANUAL09.0
CHAPTER 3B ENGINE PAGE 3B - 44 -
Check the clearance of the journal of the big end of
the connecting rod in X—Y directions
Max. service allowance:
Replace, when it goes beyond 0.05mm
Measure the run out of the crankshaft
Max service allowance:
Replace, when it goes beyond 0.10mm
Check if there is any abnormal noise and
looseness, when the crankshaft bearing revolves.
Replace totally, if any abnormal noise/looseness is
detected.
3.6.4 Assembling the crankcase
Use the following tools to install the oil seal of the
crankcase.
Bearing outer race driver
Bearing outer race 32x35mm

Linhai Mini 80 Specifications

General

Brand	Linhai
Model	Mini 80
Category	Offroad Vehicle
Language	English