CHAPTER 3A ENGINE 260/ 300 / 400 cc ATV SERVICE MANUAL09.0
CHAPTER 3 ENGINE PAGE. 3A- 17
4. Clean:
zRadiator
Fill soft water into the filer neck support c
(reservoir tank).
5. Install:
zGasket c NEW
zDrain boltd
6. Loosen:
zHosec
7. Connect:
zHose (reservoir tank)
8. Fill:
zRadiator
( to specified levelc )
Fill the coolant slowly, until the coolant comes
out from the head hose.
zReservoir tank
( to maximum level ○
a
)
Recommended coolant:
High quality ethylene glycol anti-freeze
containing corrosion inhibitors for
aluminum engine.
Coolant d and water ③ (soft water) :
Mixed ratio: min50% /max50%
follow the instruction of the coolant
Total amount:
2 L
Reservoir tank capacity:
0.35L
To Next Page
Loading...
Need help?
General
