Miele DGC 6 Series User Manual

Technical Information
21
DGC 6xxx
2. Disconnect the appliance from the power supply.
3. Remove the lid; see Section 010-4.2.
4. Remove the rear/left side panel; refer to Section 010-4.4.
5. Pull off the black heat-flow fan hose from the cable duct.
6. Remove the T20 screw securing the interference suppression capacitor to
the cable duct. See Figure 010-7, Item 1.
7. Remove the T20 screw securing the cable duct to the appliance. See
Figure 010-7, Item 2.
Figure 010-7: Cable Duct Screws
1
2

Miele DGC 6 Series Specifications

General

Brand	Miele
Model	DGC 6 Series
Category	Oven
Language	English