Technical Information
30
DGC 6xxx
panel. See Figure 030-1.
Figure 030-1: Inner Rear Panel Retaining Nuts
6. Remove the T20 screw (Figure 030-2, Item 1) securing the convection
heater element (Figure 030-2, Item 2).
Figure 030-2: Convection Heater Element
7. Disconnect the convection heater element spade connectors from the
rear of the appliance. See Figure 030-3, Item 1.
8. Remove the two 7mm nuts securing the convection heater element to the
rear of the appliance. See Figure 030-3, Item 2.