To Next Page

To Previous Page

11 - 8 Operator’s Manual

11 Patient Data Management

Print Task

Displays image or report printing tasks.

In the Task Management dialog box, the patient ID, name, destination, progress, type, contents and

task created time are displayed.

You can perform the following operations:

• Click [Delete] to delete the task.

• Click [Retry] to retry the failed task.

– Click [Select All] to select all the tasks.

Task Status

• When there are tasks underway, the task management icon displays as .

• When tasks have failed, the task management icon displays as . Tap the icon to check the

reason for the failure.

• When the task management icon displays as , it means no task is underway.

DICOM Service Setting

• On the Storage Task and DICOM Print Task page, click [Service Setting] to enter the DICOM

service setting screen. For details, see “12 DICOM/HL7”.

Troubleshooting

If a serious error occurs, such as network disconnection or operation timeout, the system can try to

reconnect the network. The interval time and maximum retries can be set as desired. For details, see

the Setup chapter.

11.8 V-Access

The ultrasound system can be used to log on to a remote server to check or modify patient data on

the server.

Perform the following procedure:

1. Tap “V-Access” from the system tool bar in the top-right corner of the screen to enter the

function.

2. The system brings up a dialog box for entering the IP address of the remote server.

3. Enter the IP address and tap [OK].

4. Log on with the server account and password.

5. Check the data transferred and carry out operations as necessary.

11.9 Q-Path

You can use the ultrasound system to check data on browser directly. After you have ordered

storage service of a network website service, you can check data using the website, authorized

account and password (provided by the service vendor).

Q-path is a network server provided by Telexy Healthcare Inc. for digital image storage. For details,

please contact Q-Path service provider.

NOTE:

• For Q-path settings, see the Setup chapter.

Mindray TEX20 Operator's Manual

Other manuals for Mindray TEX20