Mindray TEX20 Operator's Manual

Operator’s Manual 4 - 1
4 Setup
The Setup function is designed to set the configuration parameters of operating the system and
maintaining user workflow setup data. The setup data of the user and system are stored to the hard
drive, and should be backed up to CD/DVD or USB memory device.
CAUTION
When the preset data is changed, be sure to save the preset data according to
the methods described in this chapter. Mindray is not responsible for the loss of
preset data.
• To enter Setup: Tap in the top-right corner of the screen and select [Setup] to enter the
setup menu.
• To exit Setup:
Select [Save] in the Setup menu. The parameter settings are saved.
Select [Cancel] in the Setup menu to close the Setup menu.
If you change the system language and tap [Save] in the Setup menu, the system automatically
shuts down to make the modification effective.
TIP:
Configuration parameters may not be all fit on one screen view, swipe downwards to see more
options.
4.1 System Preset
4.1.1 Region
Set the hospital name, language, time zone, time format and system date/time.
Item Description
Hospital Information To set the hospital-relevant information such as name, address,
telephone, and so on.
Language To select a language for the system.
Load Logo Import image for logo loading.
NOTE:
For a better display effect, please try to use an image with 400*400
pixels.
Time Zone To select the time zone.
Time Format To select the time format.
Date Format To set the date format.

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English