4 - 16 Operator’s Manual
4 Setup
Image Settings
Tap [Image Setting] to enter the page, you can set the brightness, contrast and saturation of image
printing, or you can use the default values.
Display
Tap [Display] to enter the page, you can set output resolution and range for the connected external
display.
4.1.12 Maintenance
The [Maintenance] function is designed for you to import or export user data, restore factory setting
and export log. You may also execute self-test and option installation/trial through the maintenance
menu. If you require other maintenance functions, please contact Mindray Customer Service
Department or sales representative.
Exporting Setup Data
This function is used to write all setup data of the system into a disk for backup. The format of the
data file is .PDP.
You can select the following types of preset data to export from the system:
• General module preset data.
• Exam mode related preset data.
Perform the following procedure:
1. Select the target module.
2. Tap [Export] to open the [Export Module Data]/[Export Exam Mode Data] screen.
3. Select the path to save the data.
4. Select the exported file and type as PDP and tap [OK].
Importing Setup Data
This function is used to import the existing setup data to the setup data memory of the system. The
system will reset and operate according to the setup preferences that were imported.
Perform the following procedure:
1. Tap [Import] to open the Load Data screen.
2. Select the imported file.
3. Tap [OK], a progress bar will appear and the setup data is imported to the specified path.
4. To restore the factory setup data, tap [Load Factory] on the right side of the screen.
Probe Check
This function is used to check the condition of transducer elements to evaluate the probe
performance.
Before performing the probe check, ensure the probe head must be clean and the probe is in non-
scanning state.
Tap [Probe Check] to enter the Probe Check screen:
• If a transducer element is in malfunction, it is displayed as a red spot.
Property Preset print service properties.
Item Desciption
To Next Page
Loading...
Need help?
General
