Operator’s Manual C - 1
C
iVision
The iVision function is used to demonstrate the stored images. Image files are played one by one
according to file names (including system-relevant and PC-compatible format images).
Perform the following procedure:
1. Tap and select [Setup] > [System] > [iVision] to enter the iVision setting screen.
2. Add the contents to be played and select demo mode.
3. Select an item in the list and tap [Start] (in the bottom-left corner of the screen) to begin the
demonstration.
4. Tap [Exit] to exit iVision status.
C.1 Demonstration item
Demonstration items are image files in formats supported by the system. You can add exam data
from the patient database or system-supported image files and folders to the demonstration list. For
files and folders in the demonstration list, the images in the directory and subdirectory are played
one by one, and the system will automatically skip files that cannot be opened.
• [Add File]: to add files to the file list.
•[Delete File]: to delete selected files or catalogs from the file list.
•[Export File]: to export selected directories/files to external storage devices. Select [Export] to
bring up the Browse dialog box, select the path and click [OK].
C.2 Demonstration mode
The system automatically plays all the image files in the list one by one.
The time interval between images played is same and can be changed.
C.3 Option of Demo
You can choose whether to repeat the demonstration or exit after a demonstration is completed.
To Next Page
Loading...
Need help?
General
