Mindray TEX20 Operator's Manual

3 System Preparation
Operator’s Manual 3 - 7
To exit standby
• Touch the screen lightly.
• Press the power button.
3.4 Monitor Brightness/Contrast Adjustment
Perform the following procedure:
1. Tap in the top-right corner of the screen to open the system tool bar.
2. Drag the slider to change the brightness/contrast on the brightness control or contrast
control .
NOTE:
Avoid operating in direct sunlight or the touch screen could be obscured.
3.5 Display Position Adjustment
Gently hold the bottom edge of the display when adjusting its position.
The display can be rotated 90 degrees clockwise and display landscape or portrait screen
adaptively, for screen displays details, see “2.11.1 Screen Display”.
TIP:
The screen rotation is not applicable to all the modes. When it is not available, a prompt is
displayed in the upper right corner of the screen.
The display can be tilted backward as shown below.
30°

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English