4 Setup
Operator’s Manual 4 - 37
To add an iStorage service
1. Set the iStorage server properties as described above.
2. Tap [Add] to add the service to the service list.
To modify a network service
1. Select the service to be updated in the service list.
2. Modify the parameters in the upper part of the screen and tap [Update] to update the setting.
4.6.4 Network Preset
iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist.
For details about this feature, see the UltraAssist manual.
To add an iStorage service, perform the following procedure:
1. Set the iStorage server properties as described above.
2. Tap [Connect] to verify connection.
3. Tap [Add] to add the service to the Service list.
To edit a network service, perform the following procedure:
1. Select the service to be updated in the service list.
2. You can see properties in the Configure Service area.
3. Do one of the following to edit the network service:
– Modify the properties and tap [Update] to update the setting.
– Tap [Default] to set as the default service.
– Tap [Delete] to delete it from the service list.
/ Clear Click to cancel the parameter setting.
Add Click to add the Network service to the service list.
Update Select an item in the service list, change the
parameters in the above area, and click [Update] to
update the item in the service list.
Delete Click to delete the selected service in the service list
Default Set the eGateway server as the default.
Select an item in the service list, click [Default] and
you can see “Y” in the Default column.
Connect Click to verify whether the connection is normal.
Type Item Description
Item Description
Service Name The name of the iStorage service.
IP Address IP address of the iStorage service device.
Port Port for transmitting.
To Next Page
Loading...
Need help?
General
