Mindray TEX20 Operator's Manual

15 System Maintenance
Operator’s Manual 15 - 5
Disinfection Procedures
NOTE:
and select [Screen Lock] to • The system should be cleaned in power off status; or in power
on status, tap lock the system for 10 seconds.
• The ultrasound system has passed puncture test and leakage current test, and thus can be
disinfected on power-on status.
After cleaning, disinfect the main unit as follows.
1. Wear medical gloves to prevent infection.
2. Disinfect the main unit with disinfectant wipe, spray or solution. Follow the disinfectant
manufacturer’s recommended contact time and method.
Do not disinfect trolley back handle, manufacturer logo, any visible sockets or interfaces (such
as probe sockets, ventilation holes, loudspeaker, IO interface and power supply panel).
PDI Super Sani-Cloth Wipe
Bode Chemie Gmbh Mikrobac Tissues Wipe
Diversey VIREX TB Solution
Schulke Schulke mikrozid
®
Sensitive Wipes Wipe
Dr.Schumacher GmbH CLEANISEPT WIPES Wipe
Parker Laboratories Inc. PROTEX ULTRA Wipe
Laboratoires ANIOS wipe anios clean up Wipe
/ 99.5% isopropyl alcohol Solution
/ 75% alcohol Solution
/ 2.7%~3.3% hydrogen peroxide Solution
/ 0.5% sodium hypochlorite Solution
Diversey Inc OXIVIR TB WIPES Wipe
Metrex Research CAVIWIPES Wipe
Dr.Schumacher GmbH Cleanisept Wipes Wipe
GAMA Healthcare Ltd Clinell Universal wipes Wipe
Parker Laboratories Inc. protex ultra disinfectant wipes Wipe
Professional Disposables
International Inc
Sani-Cloth® AF3 Wipe
Professional Disposables
International Inc
Sani-Cloth® HB Wipe
/ VIREX II 256 Solution
Table 15-1
Manufacturer Product Name Type

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English