Mindray TEX20 Operator's Manual

4 Setup
Operator’s Manual 4 - 7
ICA/CCA && RAR
Set the measurement properties of ICA, CCA, Renal A and Aorta.
Cardiac Value Range Display
Set whether to display the EMINCA study.
Physiology Parameter
Set the unit of Temp, CVP, ICP, and Pressure.
4.1.5 OB
Set the relevant information regarding the fetal gestational age, fetal growth formula and fetal
weight.
To set the default formula
Perform the following procedure:
1. On the [Fetal Gestational Age], [Fetal Growth] or [Fetal Calc] page, select an OB Item in the
left column.
2. Select a formula in the right column.
3. Click [Default].
The default formula is marked with a √.
To set the fetal weight display
Perform the following procedure:
1. Enter the [Fetal Calc] page.
2. Select the [Fetal Weight Unit].
Select Metric, English or English & Metric from the drop-down list.
3. Select the formula for calculating the weight percentile.
Select the formula from the drop-down list of [EFW-GP].
To import/export an OB Table or Formula
TIP:
Only imported user-defined tables can be exported.
Perform the following procedure:
1. Select [Import] or [Export] on the Fetal Gestational Age or Fetal Growth page.
2. Select the drive and file path where the data is located.
3. Select the data file to load or export, click [OK] to confirm.
The imported user-defined table for FG and GA must be a *.csv file. The format of the *.csv
file is described as follows:
–FG table
Table Type Author Name SD Type Meas Value
Unit
SD Unit

Mindray TEX20 Specifications

General

Brand	Mindray
Model	TEX20
Category	Diagnostic Equipment
Language	English