AWVG7 Analog Wideband Video Generator module
AWVG7 module m
ain menu
Use the AWVG7 module main menu to perform the following tasks:
Set the logo, text, or circle overlay on the output signal.
Set the timing offset on the output signal.
Scroll the active p icture area of the output signal.
Set whethe
r a sync signal is multiplexed with the B and R signals when a
GBR signal is being output.
Enable or
disable the output signal on the CH1, CH2, and CH3 c onnectors.
Use the up (▲)ordown(▼) arrow button to scroll through the main menu. The
following figure shows the AWVG7 module main menu.
Figure 3-27: AWVG7 module main menu
MOVING PICTURE. Scrolls the active picture area of the output test signal. Select
this menu item, and then press the ENTER button to access the MOVING
PICTURE submenu. (See page 3-53.)
3–52 TG8000 Multiformat Test Signal Generator User Manual
To Next Page
Loading...
Need help?
General
