Compliance information
Australia / New Zealand
Declaration of
Conformity – EMC
Complies w ith t
he EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
EN 55022. Radi
ated and conducted emissions, Class A, in accordanc e
with EN 55032.
Australia / New Zealand contact.
Fluke Australia PTY LTD
Unit 26, 7 Anelia Avenue
Castle Hil
l, NSW, Australia 2154
Russian Federation
This product is approved by t he Russian government to carry the GOST mark.
Safety c
ompliance
This section lists the safety standards with which the product complies and other
safety compliance information.
EC decl
aration of
conformity – low voltage
Compliance was demonstrated to the following specification as listed in the
Official Journal o f the European Union:
Low Voltage Directive 2006/95/EC.
EN 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
U.S. nationally recognized
testing laboratory listing
UL 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
Canadian certification
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measuremen t, Control, and Laboratory Use – Part 1: General
Requirements.
Additional compliances
IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
Equipment type
Test and measuring equipment.
Safety class
Class 1 – grounded product.
xviii TG8000 Multiformat Test Signal Generator User Manual
To Next Page
Loading...
Need help?
General
