SDI7 Dual Channel SD/HD/3G SDI Video Generator module
SDI7 Dual Chan
nel SD/HD/3G SDI Video Generator module
This section
describes the module-specific functions of the SDI7 Dual Channel
SD/HD/3G SDI Video Generator module. Refer to the following locations for
additional information about this module:
SDI7 module connectors for a description of the rear-panel connectors. (See
page 2-18.)
SDI7 module functional check for a basic procedure to check that the module
is functional. (See page 1-41.)
TG8000 Specifications and Performance Verification Technical Reference for
module specifications and for a detailed procedure to verify that the module
is functioning as specified.
TG8000 Programmer Manual for information about the commands to
remotely control the module.
SDI7 module product description
The SDI7 Dual Channel SD/HD/3G SDI Video Generator module can be operated
as a s ignal g enerator to output two channels of 270 Mb/s SD-SDI, 1.5 Gb/s
HD-SDI, and 3 Gb/s SDI video test signals in a variety of formats, including both
Leve
l A and Level B mapping structures for 3G-SDI signals. (See page 3 -257, To
select an output signal on the SDI7 module.)
The
module provides the following features:
Two serial-digital channels, each independently configurable for 270 Mb/s,
1.
5 G b/s, or 3 Gb/s signals.
Two SDI outputs per channel for simultaneous test signal and test/black
s
ignal output.
One clock/frame/line trigger output.
Generates test signals in many for mats, with both 3G-SDI Level A and
Level B mapping structures supported.
Standard test signals, including SMPTE color bars and SDI pathological test
patterns.
Zone plate test signals, with full control of all parameters.
Full frame picture display.
Overlay of circle or logo on the video signal.
Text overlay with support for Latin, Cryillic, Greek, and symbol character sets.
3–252 TG8000 Multiformat Test Signal Generator User Manual
To Next Page
Loading...
Need help?
General
