HDLG7 HD Dual Link Video Generator module
HDLG7 HD Dual L
ink Video Generator module
This section
describes the module-specific functions of the HDLG7 HD Dual
Link Video Generator module. Refer to the following locations for additional
information about this module:
HDLG7 module connectors for a description of the rear-panel connectors.
(See page 2-16.)
HDLG7 module functional check for a basic procedure to check that the
module is functional. (See page 1-39.)
TG8000 Specifications and Performance Verification Technical Reference for
module specifications and for a detailed procedure to verify that the module
is functioning as specified.
TG8000 Programmer Manual for information about the commands to
remotely control the module.
HDLG7 module product description
The HDLG7 HD Dual Link Video Generator module can be operated in either
of the following two modes:
Dual link converter. The module can convert a SMPTE 292M serial digital
video stream carrying a SMPTE 274M signal to a SMPTE 372M serial digital
dual link video signal.
Dual link generator. The module can output either HD SDI video test signals
or projector test patterns (digital cinema 2K formats only).
Refer to the TG8000 Specifications and Performance Verification Technical
Reference for information about which dual link outputs can be converted from
e
ach input signal format.
Refer to To select the HDLG7 module Converter mode for information about the
a
vailable types of conversions. (See page 3-221.)
The module provides the following features:
Tw o pairs of dual link outputs that include SMPTE 352 payload.
Supports a wide variety of output formats:
1920 × 1080i, 1920 × 1080p, 1920 × 1080PsF, 2K × 1080p, 2K × 1080PsF,
and 2K × 1556PsF
3–214 TG8000 Multiformat Test Signal Generator User Manual
To Next Page
Loading...
Need help?
General
