Tektronix TG8000 User Manual

SDI7 Dual Channel SD/HD/3G SDI Video Generator module
7. Enter the optio
nkey:
a. Press the up (▲)ordown(▼) arrow button until TG8000 : UTILITY :
OPTION KEY is d
isplayed.
b. Press the ENTER button to e nter the option key edit mode. The
underscore character (_) appears under the first character of the option key.
c. Use the up (▲)ordown(▼) arrow button to select the first character of
the option key.
d. Use the left (◄)orright(►) arrow button to move the underscore
character to the next character in the option key.
e. Enter all of the option key chara cters, and then press ENTER button to
confirm the selection.
f. Press the BACK button twice to exit the UTILITY submenu. This returns
to the top of the UTILITY submenu.
8. Cycle power on the instrument to ensure the newly enabled option(s) is fully
operational.
CAUTION. For Option DBT upgrades, be sure to cycle power on the instrument
afte
r entering the new option key. A reboot is required in order to fully activate
the Dolby E functionality.
9. Af
ter the instrument reboots, verify that Option 3G and/or DBT is e nabled:
a. If necessary, press the front-panel MODULE button until TG8000 :
PR
ESET is displayed.
b. Press the up (▲)ordown(▼) arrow button until TG8000 : UTILITY is
d
isplayed, and then press the ENTER button.
c. Press the up (▲) or down (▼) arrow button until TG8000 : UTILITY
:OPTIONSis displayed.
d. Verify that SDI7[slot number] 3G and/or DBT is displayed. This
indicates that Option 3G and/or DBT has been enabled.
3–256 TG8000 Multiformat Test Signal Generator User Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English