USER’S MANUAL__________________________________________________________________
14 __________________________________________________________________ M211322EN-D
prompt
—Some features of the RVP900 operate by displaying questions
and waiting for you to type an answer. The text of prompts is displayed in
bold, monospaced type.
1.5 Safety
The Vaisala RVP900 is delivered to you has been tested and approved as
shipped from the factory. Note the following precautions:
1.5.1 ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage to
electronic circuits. Vaisala products are adequately protected against ESD
for their intended use. However, it is possible to damage the product by
delivering electronic discharges when touching, removing, or inserting any
objects inside the equipment housing.
To make sure you are not delivering high static voltages yourself:
- Avoid touching exposed connectors unnecessarily.
- Handle ESD sensitive components on a properly grounded and
protected ESD workbench.
- When an ESD workbench is not available, ground yourself to the
equipment chassis with a wrist strap and a resistive connection cord.
- If you are unable to take either of the above precautions, touch a
conductive part of the equipment chassis with your other hand before
touching ESD sensitive components.
- Always hold the boards by the edges and avoid touching the
component contacts.
CAUTION
Caution warns you of a potential hazard. If you do not read and follow
instructions carefully at this point, the product could be damaged or
important data could be lost.
NOTE
Note highlights important information on using the product.
CAUTION
Do not modify the unit. Improper modification can damage the product or
lead to malfunction.
To Next Page
Loading...
Need help?
General