Appendix G_______________ RVP900 Specification for ASR9-WSP with RCP903 ASR9-WSP Panel
VAISALA______________________________________________________________________ 483
G.5.3 RCP903 ASR9-WSP Custom Panel
The RCP903 is designed to be form, fit, and function compatible with the
original RxNet7 implementation. Carrying forward the same physical
interfaces and logical functionality as the original implementation. Its
main features are as follows:
- CPLD and FLASH memory to configure the panel and load the
application
- Altera Cyclone IV FPGA and 16 MB of SRAM to replace the RxNet7
PLDs and SRAM
- 100/1000 Ethernet Capability running TCP/IP for control and status
and UDP packets for I/Q data
- WSP#1 and #2 connectors with backward compatible pin out
- Serial Port #1 and #2 with backward compatible pass through
functionality
- Pre-trigger and tagging interface to RVP901-WSP
- 24V DC Supply Input (1A max current)
- 8 Indicator LEDs
- Backward compatible 2x 6-Level Weather Indicators and 4x Test
LEDs
- 2x RCP903 Status Indicators
To Next Page
Loading...
Need help?
General