USER’S MANUAL__________________________________________________________________
370 _________________________________________________________________ M211322EN-D
C.8 Setup "Mf" Command (Clutter Filters)
Test Goal
Verify that the TTY setups for the Clutter Filters section are properly
configured for the customer application.
Special Test Equipment
- KVM connected
Reference
- See Section 4.2.3 Mf — Clutter Filters on page 112
Test Procedure
1. Enter the TTY setups and type the "Mf" command.
2. Set all the values, as required, for your operation.
Test Passed
Parameters set.
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________